2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump
2SK Type Water Ring Vacuum Pump

2SK Type Water Ring Vacuum Pump

Flow rate Q:Air volume1.5~30m³/min
Single motor power of the moto:4~55kW
Caliber:40~125mm
Conveyed medium:Suction or pressure conveying of gases, and gases that are non-corrosive, insoluble in water, and free of solid particles.
Contact Us
+86 021 5643 0446
Detail
Overview
The 2SK water-ring vacuum pump is a double-stage model equivalent to two SK pumps in series. As SK series can only reach -700mmHg ultimate vacuum, 2SK is designed for higher vacuum and larger pumping speed in high-vacuum conditions.
The 2SK-P1 two-stage water-ring vacuum pump - air ejector unit operates at 10~50mmHg absolute pressure, but with lower efficiency in high vacuum. For long-term use, a Roots-water ring unit is recommended for optimal high-vacuum pumping efficiency.
2SK pumps/units suck air or non-corrosive, water-insoluble, solid-free gases to create vacuum in sealed containers, suitable for light textile, food, metallurgy, chemical industries in processes like vacuum evaporation, concentration, rewetting, drying, and smelting.
Features
1.Higher vacuum degree and larger pumping speed in high-vacuum zone compared to SK single-stage pumps. 2.Significantly higher shaft power than 2BV/2BE series at the same pumping speed. 3.Dual-impeller structure complicates manufacturing/maintenance with more wearing parts, leading to gradual replacement by 2BV/2BE series.
Parameters
Model

Suction capacity

(m3/min)

Ultimate vacuum(MPa)
(Millimeter of mercury)

Power

KW

Pump speed

rpm

Water supply volume(L/min)

Diameter

(mm)

Maximum
Suction pressure:0.093MPa
-700mmHg
时
Inlet
Outlet
2SK-1.5
1.5
0.9
-0.098
(-735)
4
1440
10-15
40
40
2SK-3
3
2
7.5
1440
15-20
40
40
2SK-6
6
4
15
1460
25-35
50
50
2SK-12
12
8
22
970
40-50
100
100
2SK-20
20
14
45
740
60-80
125
125
2SK-30
30
20
55
741
60-80
125
125

Note:

1.The performance indicators and curves of the 2SK water-ring vacuum pump listed in the table refer to those under the following specified conditions:

① Atmospheric pressure: 0.1013MPa (760mmHg);

② Inlet water temperature: 15℃;

③ Inhaled air temperature: 20℃;

④ Relative air humidity: 70%.

2.The water supply volume is the value at the suction pressure of -0.05MPa (-400mmHg), which may exceed this value at ultimate vacuum.

3.The allowable performance tolerance is ±10%.

4.The relevant data is for reference only. For updated product parameters, please contact our customer service.

Senior engineer
Provide you with project quotation and solution
Contact us